There is a chamber built into the skimmer where media such as RowaPhos or carbon can be used in a sock or bag and there is even an optional media box available.
The performance is as you would expect from any Deltec skimmer, drawing in 300lts of air per hour for maximum waste removal.
The Deltec philosophy is that for every 1000 Ltrs of water in the aquarium that you require 400 - 500 Ltrs of air per hour to achieve efficient skimming. This makes the MCE600 skimmer suitable for 875 Ltrs (192 u.k gallons) for a normally stocked reef aquarium or 563 Ltrs (124 uk gallons) for a heavily stocked fish only system.
From testing that we have carried out we have found that Deltec skimmers produce at least 2 - 4 times the air volume used on most competitors skimmers which are claimed to be suitable for comparable water volumes.
Technical Data
For US 110V specifications please visit our D-D USA section of the web site
-
MCE600 Skimmer : Article No. 31117
-
Can be hung on the outside of the aquarium or sump.
-
Draws its own water from the aquarium via the internal needlewheel pump.
-
400 litres of air/hr are produced at the venturi.
Dimensions:
-
L 260mm W 180mm H 500mm (normal position).
-
H 570mm (allowing for removal of the cup).
-
Height above lip of aquarium - normal position 230mm.
-
Width of body only external to tank 85mm.
-
Pipes extend by 95mm from skimmer body.
Stocking:
Technical information
Product dimension
Français
English
Nos nouveautés
En stock
Prix :